HIPS
It is a printing material that is completely soluble in limonene, there will be no residue on the surface of the model after dissolution, and the contact surface is smooth and flat; its printing performance is similar to ABS, and can be used for ABS, PETG and other materials to print extremely complex shapes or a supporting material having the shape of a partially enclosed chamber; suitable for multi-nozzle printers.
- * Description:
-
Description
It is a printing material that is completely soluble in limonene, there will be no residue on the surface of the model after dissolution, and the contact surface is smooth and flat; its printing performance is similar to ABS, and can be used for ABS, PETG and other materials to print extremely complex shapes or a supporting material having the shape of a partially enclosed chamber; suitable for multi-nozzle printers.
Sellingpoint
Solubility
Support
Heat resistanceHigh toughness
High impact resistance
- * Application
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | HIPS |
| Density(g/cm3) | 1.05 |
| Heat Distortion Temp(℃,0.45MPa) | 80 |
| Melt Flow Index(g/10min) | 3(200℃/5kg) |
| Tensile Strength(MPa) | 27 |
| Elongation at Break(%) | 55 |
| Flexural Strength(MPa) | 39 |
| Flexural Modulus(MPa) | 2280 |
| IZOD Impact Strength(kJ/㎡) | 11 |
| Durability | 7/10 |
| Printability | 6/10 |
| Recommended printing parameters | |
| Extruder Temperature(℃) | 230 – 270℃ Recommended temperature：250℃ |
| Bed temperature(℃) | 100 – 115°C |
| Fan Speed | 0% |
| Printing Speed | 40 – 100mm/s |
| Heated Bed | Required |
| Recommended Build Surfaces | Glass plate, PVP solid glue, high temperature tape |
| Feature | |
| Flexible | —— |
| Elastic | —— |
| Impact Resistant | √ |
| Soft | —— |
| Composite | —— |
| UV Resistant | —— |
| Water Resistant | —— |
| Dissolvable | √ |
| Heat Resistant | √ |
| Chemically Resistant | —— |
| Fatigue Resistant | —— |
| Need drying | —— |
| Heated Bed Required | √ |
| Print recommend | Minimize the overhang angle structure in the model |
1.HIPS has a large shrinkage rate, so you should pay attention to heat preservation when printing, and print in a printer with a closed chamber.
2. It is recommended to set the distance between the support and the model to 0, the first contact layer to slow down and turn off the blowing fan to improve the bonding strength with the main material.
-
MSDS -
REACH -
ROHS -
TDS
