• PLA+
  • 线材
  • 3D Printer Resin1920
  • PLA+1000X400
  • 线材
  • 3D Printer Resin

ePLA-Gloss

ePLA-Gloss is a cost-effective PLA material with a glossy surface effect, and the surface is smooth without layering. Compared with ABS, ePLA-Gloss does not need to close the cavity, has low shrinkage, no warping, no cracking, and can print large-scale models; compared with other materials, ePLA-Gloss is easier to peel off from the surface of the model, and the surface of the contact surface is smooth and flat.

Color:
Diameter Size:
Net Weight:
Personal Purchase:

Introduction

Product Details

Parameter Information

Download

* Description:

Description

When printing with ePLA-Gloss, there will be no irritating smell, which is safe and environmentally friendly; The spool is based on PETG, ABS, PLA and other production wastes and industrial wastes, which are recycled and injected;And the outer box is made of recyclable cartons. eSUN's concept of environmental protection makes 3D printing more sustainable.The ePLA-Gloss are not easy to be brittle, and the printing is smooth for a long time without clogging. This pla filament can be used for early concept models and rapid prototyping.

Sellingpoint

Green and environment-friendly

High cost - effective

High speed printing

The support is easy to remove

View more about PLA Filament

Easy to print
Hard to break
Shinny appearance

* Product introduction video
* Application
Decoration COSPLAY
* Print model
  • ePLA print model
  • ePLA_black print model
  • ePLA_blue print model
  • ePLA_red print model
  • ePLA_white print model

ePLA-Gloss_01 ePLA-Gloss_02 ePLA-Gloss_03

Filament Properties Table
3D PRINTING FILAMENT ePLA-Gloss
Density(g/cm3) 1.26
Heat Distortion Temp(℃,0.45MPa) 56.70
Melt Flow Index(g/10min) 3.3(190℃/2.16kg)
Tensile Strength(MPa) 64.51
Elongation at Break(%) 31.54
Flexural Strength(MPa) 68.99
Flexural Modulus(MPa) 1514.78
IZOD Impact Strength(kJ/㎡) 7.9
Durability 4/10
Printability 9/10
Recommended printing parameters
Extruder Temperature(℃) 190 – 230℃
Recommended temperature:210℃
Bed temperature(℃)  60°C
Fan Speed  100%
Printing Speed  40 – 100mm/s
Heated Bed  Optional
Recommended Build Surfaces Masking paper, PVP solid glue, PEI
Feature
Flexible ——
Elastic ——
Impact Resistant ——
Soft ——
Composite ——
 UV Resistant ——
Water Resistant ——
Dissolvable ——
Heat Resistant ——
Chemically Resistant ——
Fatigue Resistant ——
Need drying ——
Heated Bed Required ——
Print recommend ——

Leave Message

Leave Message