S200 Standard Resin
Standard Resin is a cost-effective resin material developed by eSUN for common consumption scenarios.S200 Standard Resin is easy to print and can form thin supports. The small details of the model are clearly presented.
Color:
Net Weight：
Personal Purchase:
- * Description:
-
Description
Low odor; High precision, fine surface, clear texture; rigid, the S200 Standard Resin is not easily deformed by external forces; Macaron color 3d printer resin, suitable for printing Enthusiasts; Strong compatibility, suitable for mono screens and color screens; cost-effective.
Sellingpoint
Easy to print
High rigidity
High precision
Low odorMacaron Colors
Wide Compatibility
Cost-effectiveNotes
Shake well before printing
- * Application
- * Print model
-
| 3D PRINTING PHOTOPOLYMER RESIN Properties Table | |
|---|---|
| 3D PRINTING PHOTOPOLYMER RESIN | S200 Standard Resin |
| Viscosity(mPa·s) | 182-252 |
| Density(g/cm3) | 1.107-1.109 |
| Tensile Strength(MPa) | 36-64 |
| Elongation at Break(%) | 16-32 |
| Flexural Strength(MPa) | 27-70 |
| Impact Strength(J/m) | 25-55 |
| Tearing Strength(GPa) | / |
| Heat Distortion Temp(℃) | / |
| Hardness(Shore D) | 83-86 |
| Grades (out of 10) | |
| Strength（S） | 8 |
| Toughness（F） | 7 |
| Forming（P） | 9 |
| Accuracy（S） | 8 |
| Speed （A） | 9 |
-
TDS
