PLA+
eSUN PLA+ filament is modified based on PLA material, easy to print. In addition, PLA plus improves the toughness and layer adherence.
Color:
Diameter Size：
Net Weight：
Personal Purchase:
Color:
Diameter Size：
Net Weight：
Personal Purchase:
Color:
Diameter Size：
Net Weight：
Color:
Diameter Size：
Net Weight：
Color:
Diameter Size：
Net Weight：
Cardboard Spool
Refilament
Spooless Set
3KG Spool
5KG Spool
- * Description:
-
Description
PLA+ is an environment-friendly material, which is easy to print and has smooth surface. PLA+ filament has good strength, rigidity, toughness balance, strong impact resistance; So PLA plus is considered suitable for functional parts printing. eSUN PLA+ is approved by FDA, safer to use; PLA pro can be used for modeling, rapid prototyping.
Features
Good toughness
strong impact resistance
High speed printingSmooth printed surface
Easy to print
Hard to breakView more about PLA Filament
- * Product introduction video
-
- * Application
- * Print model
-
-
Parameters forbrBambu Lab & Creality -
MSDS-EU-EN -
MSDS-UN-GHS-EN
-
MSDS-GB-EN
-
REACH -
ROHS -
FDA -
TDS -
EN71 -
EN71-US California Proposition 65
-
EU-Food safety
| Density(g/cm3) | 1.24 |
| Melt Flow Index | 5.7(190℃/2.16kg) |
| Heat Distortion Temp(℃,0.45MPa) | 53 |
| Tensile Strength(MPa) (XY) | 53.05 |
| Tensile Strength(MPa)(Z) | 26.88 |
| Elongation at Break(%)(XY) | 3.89 |
| Elongation at Break(%)(Z) | 2.39 |
| Flexural Strength(MPa)(XY) | 90.57 |
| Flexural Strength(MPa)(Z) | 62.2 |
| Flexural Modulus(MPa)(XY) | 3114.92 |
| Flexural Modulus(MPa)(Z) | 2832.91 |
| IZOD Impact Strength(kJ/㎡)(XY) | 4.53 |
| IZOD Impact Strength(kJ/㎡)(Z) | 2.33 |
| Extruder Temperature(℃) | 190-230℃/374-446℉ |
| Bed temperature(℃) | 45-60℃ |
| Fan Speed(％) | 100% |
| Printing Speed(mm/S) | ＜200mm/s |
| Heated Bed | Need |
