• esun products
  • shopify ePLA-Metal
  • S200 Standard Resin
  • esun products
  • ePLA-Metal
  • S200 Standard Resin

eASA

The ASA characteristics are similar to ABS material, but it is more resistant to ultraviolet rays and harsh weather conditions.Besides,it has strong toughness, strong rigidity, and high impact resistance; The excellent weather resistance and mechanical properties make it more resistant to the effects of environmental aging. The ASA material is widely used in outdoor applications .

Color:
Diameter Size:
Net Weight:
Personal Purchase:

Introduction

Parameter Information

Notes

Download

* Description:

Description

The ASA characteristics are similar to ABS material, but it is more resistant to ultraviolet rays and harsh weather conditions.Besides,it has strong toughness, strong rigidity, and high impact resistance; The excellent weather resistance and mechanical properties make it more resistant to the effects of environmental aging. The ASA material is widely used in outdoor applications .

Sellingpoint

Weather resistance
High toughness

High rigidity
High impact resistance

* Application
Building materials Car Outdoor Electronic and electrical
* Print model
  • eASA print model (2)
  • eASA print model (3)
  • eASA print model (4)
  • eASA print model
Filament Properties Table
3D PRINTING FILAMENT eASA
Density(g/cm3) 1
Heat Distortion Temp(℃,0.45MPa) 88
Melt Flow Index(g/10min) 10-15(220℃/10kg)
Tensile Strength(MPa) 50
Elongation at Break(%) 30
Flexural Strength(MPa) 35
Flexural Modulus(MPa) 4300
IZOD Impact Strength(kJ/㎡) 19
Durability 10/10
Printability 7/10
 

Recommended printing parameters

Extruder Temperature(℃) 240 – 270℃
Recommended temperature  240℃
Bed temperature(℃)  90 – 110°C
Fan Speed  0%
Printing Speed  40 – 100mm/s
Heated Bed  Required
Recommended Build Surfaces PVP solid glue, PEI
Feature
Flexible ——
Elastic ——
Impact Resistant
Soft ——
Composite ——
 UV Resistant
Water Resistant ——
Dissolvable ——
Heat Resistant ——
Chemically Resistant ——
Fatigue Resistant ——
Need drying ——
Heated Bed Required
Print recommend Print in a closed box to minimize the overhang angle structure in the model

The shingkage of eASA material is high.So pls use printer which has chamber to print the eASA filament.

Leave Message

Leave Message