PETG
PETG filament is a high cost performance 3D Printer material with water resistance, chemical resistance and high toughness.
Color:
Diameter Size：
Net Weight：
Personal Purchase:
Color:
Diameter Size：
Net Weight：
Personal Purchase:
Color:
Diameter Size：
Net Weight：
Cardboard Spool
Refilament
2.5KG Spool
- * Description:
-
Description
PETG material is tougher than ABS; The product printed with petg filament has translucent and smooth surface. It's easy to print like PLA without temperature chamber.
Sellingpoint
Transparent
Great toughnessChemical resistance
Water resistanceNotes
Turn on the Z seam alignment . Turn off the Z-axis lifting with drawing.
Slower the printing speed.
- * Product introduction video
-
- * Application
- * Print model
-
-
FDA -
PETG HS Parameters for
Bambu Lab & Creality -
MSDS -
REACH -
ROHS -
TDS -
EU-Food safety -
EN71
| Density(g/cm3) | 1.27 |
| Melt Flow Index | 20（250℃/2.16kg) |
| Heat Distortion Temp(℃,0.45MPa) | 64 |
| Tensile Strength(MPa) (XY) | 34.77 |
| Tensile Strength(MPa)(Z) | 28.65 |
| Elongation at Break(%)(XY) | 5.15 |
| Elongation at Break(%)(Z) | 3.91 |
| Flexural Strength(MPa)(XY) | 41.9 |
| Flexural Strength(MPa)(Z) | 39.9 |
| Flexural Modulus(MPa)(XY) | 1228.33 |
| Flexural Modulus(MPa)(Z) | 1276.45 |
| IZOD Impact Strength(kJ/㎡)(XY) | 4.86 |
| IZOD Impact Strength(kJ/㎡)(Z) | 1.78 |
| Extruder Temperature(℃) | 230-260℃ |
| Bed temperature(℃) | 75-90℃ |
| Fan Speed(％) | 100% |
| Printing Speed(mm/S) | ＜150mm/s |
| Heated Bed | Need |
| Printing Suggestions | Dry at 60℃ for 4 hours |
