PETG Refilament
Spooless PETG Filament; Orderly wrapped, no overlap or tangle.
Color:
Diameter Size:
Net Weight:
Personal Purchase:
- * Description:
-
Description
<p><em>PETG Refilament</em> can be used in conjunction with eSpool; Freely disassemble and assemble PETG Filament with eSUN Removable eSpool according to your needs, saves storage space, recyclable and eco-friendly.</p>
Sellingpoint
Environment-friendly
- * Application
- * Print model
-
Filament Properties Table | |
---|---|
3D PRINTING FILAMENT | PETG |
Density(g/cm3) | 1.27 |
Heat Distortion Temp(℃,0.45MPa) | 64 |
Melt Flow Index(g/10min) | 20(250℃/2.16kg) |
Tensile Strength(MPa) | 52.2 |
Elongation at Break(%) | 83 |
Flexural Strength(MPa) | 58.1 |
Flexural Modulus(MPa) | 1073 |
IZOD Impact Strength(kJ/㎡) | 4.7 |
Durability | 8/10 |
Printability | 9/10 |
Recommended printing parameters | |
Extruder Temperature(℃) | 230 – 250℃ Recommended temperature:240℃ |
Bed temperature(℃) | 75 – 90°C |
Fan Speed | 100% |
Printing Speed | 40 – 100mm/s |
Heated Bed | Required |
Recommended Build Surfaces | Masking paper, PVP solid glue |
Feature | |
Flexible | —— |
Elastic | —— |
Impact Resistant | —— |
Soft | —— |
Composite | —— |
UV Resistant | —— |
Water Resistant | √ |
Dissolvable | —— |
Heat Resistant | —— |
Chemically Resistant | √ |
Fatigue Resistant | √ |
Need drying | —— |
Heated Bed Required | √ |
Print recommend | Drying at 65℃/>3h |
Turn on the Z seam alignment . Turn off the Z-axis lifting with drawing.
Slower the printing speed.
-
TDS