• new yean_2022
  • head-banner1
  • ebox lite_Pc
  • new yean_2022
  • head-banner1
  • ebox lite_Pc

eResin-PLA Pro

Based on eSUN self-produced PLA polyol synthesised, Compatible with color screen, mono screen, large and small size printers, good toughness, low odor, and smooth print surface. The molding precision is high, with high resolution , the surface of the printed product is smooth, and the printing details are clearly visible. It can be suitable for printing a variety of figures and dental model.

Color:
Net Weight:
Personal Purchase:

Introduction

Parameter Information

Notes

Download

* Description:

Description

Based on eSUN self-produced PLA polyol synthesised, Compatible with color screen, mono screen, large and small size printers, good toughness, low odor, and smooth print surface. The molding precision is high, with high resolution , the surface of the printed product is smooth, and the printing details are clearly visible. It can be suitable for printing a variety of figures and dental model.

Sellingpoint

High strength

High toughness

High precision

High resolution

Smooth print surface

Wide compatibility

* Application
Figure Education Mechanical Decoration
* Print model
  • eResin-PLA Pro_Print model
  • eResin-PLA Pro_Print model
  • eResin-PLA Pro_Print model
  • eResin-PLA Pro_Print model
 3D PRINTING PHOTOPOLYMER RESIN Properties Table
3D PRINTING PHOTOPOLYMER RESIN eResin-PLA Pro
Viscosity(mPa·s) 200-300
Density(g/cm3) 1.09-1.10
Tensile Strength(MPa) 37-48
Elongation at Break(%) 25-28
Flexural Strength(MPa) 36-49
Impact Strength(J/m) 32-36
Tearing Strength(GPa) /
Heat Distortion Temp(℃) /
Hardness(Shore D) 78-80
Grades (out of 10)
Strength(S)  6
Toughness(F)  7
Forming(P)  8
Accuracy(S)  9
Speed (A)  6

 

Recommended printing parameters
Settings Machine Type
Low Light Intensity Medium Light Intensity High Light Intensity (Monochrome LCD Screen)
Representative Machine AnyCubic Photon eSUN LCD 3.0
Nova Bene 4
Creality LD-002R
Anycubic MONO X
ELEGOO Saturn
Phrozen Sonic Mini
Exposure Time/s 13-14 6-7 2.0-4.0
Bottom Layer Count 3-5
Bottom Exposure Time ≥60 ≥60 ≥30
Lifting Distance/mm 5.5&6-inch screen:5-6 or Higher ; 8.9&13.3-inch screen:8-12 or Higher
Lift Speed/mm·min-1  90-150  90-120 50-90
Retract Speed/mm·min-1    150-200

Shake well before printing

Leave Message

Leave Message