Water Washable Resin
Can be washed with water, saving step for alcohol cleaning,
greatly shortening the post-processing time, improving printing efficiency and cost-effective.
The molding precision is high, with high resolution , the surface of the printed product is smooth, and the printing details are clearly visible. The mechanical properties such as strength, toughness and rigidity are balanced. Low viscosity, high release rate, easy to print.
- * Description:
-
Description
Can be washed with water, saving step for alcohol cleaning, greatly shortening the post-processing time, improving printing efficiency and cost-effective.
The molding precision is high, with high resolution , the surface of the printed product is smooth, and the printing details are clearly visible. The mechanical properties such as strength, toughness and rigidity are balanced. Low viscosity, high release rate, easy to print.Sellingpoint
Washable
Low viscosityHigh precision
Balanced strength, toughness and rigidity
- * Application
- * Print model
-
| 3D PRINTING PHOTOPOLYMER RESIN Properties Table | |
|---|---|
| 3D PRINTING PHOTOPOLYMER RESIN | Water Washable Resin |
| Viscosity(mPa·s) | 110-180 |
| Density(g/cm3) | 1.10-1.14 |
| Tensile Strength(MPa) | 19-46 |
| Elongation at Break(%) | 17-30 |
| Flexural Strength(MPa) | 15-50 |
| Impact Strength(J/m) | 37-97 |
| Tearing Strength(GPa) | / |
| Heat Distortion Temp(℃) | / |
| Hardness(Shore D) | 74-82 |
| Grades (out of 10) | |
| Strength（S） | 6 |
| Toughness（F） | 7 |
| Forming（P） | 8 |
| Accuracy（S） | 8 |
| Speed （A） | 8 |
| Recommended printing parameters | |||
| Settings | Machine Type | ||
| Low Light Intensity | Medium Light Intensity | High Light Intensity (Monochrome LCD Screen) | |
| Representative Machine | AnyCubic Photon | eSUN LCD 3.0 Nova Bene 4 Creality LD-002R |
Anycubic MONO X ELEGOO Saturn Phrozen Sonic Mini |
| Exposure Time/s | 8-10 | 5-6 | Not recommended |
| Bottom Layer Count | 3-5 | ||
| Bottom Exposure Time | 40-60 | 30-40 | Not recommended |
| Lifting Distance/mm | 5.5&6-inch screen：5-6 or Higher ; 8.9&13.3-inch screen：8-12 or Higher | ||
| Lift Speed/mm·min-1 | 90-150 | 90-120 | Not recommended |
| Retract Speed/mm·min-1 | 150-200 | ||
1. Shake well before printing
2. The water washable resin should not be washed for a long time. It can be tens of seconds to one minute. After washing, please use a hair dryer to dry it in time. When storing, be Automobileeful not to place it in a humid and high temperature environment.
-
REACH -
ROHS -
TDS
