• Name August 2022
  • PM200
  • AE-PC
  • Name August 2022 (2)
  • PM200-wap3
  • AE

Standard Resin

High rigidity, easy to print thin-layerness parts, good molding accuracy,can be printed as test part and be used for functional testing, rapid prototype printing.

Color:
Net Weight:
Personal Purchase:

Introduction

Parameter Information

Notes

Download

* Description:

Description

High rigidity, easy to print thin-layerness parts, good molding accuracy,can be printed as test part and be used for functional testing, rapid prototype printing.

Sellingpoint

High strength

High rigidity

* Application
Mechanical Automobile Electrical Jewelry
* Print model
  • Standard Resin_Print model red
  • Standard Resin_model
  • Standard Resin_Print model sky blue
  • Standard Resin_Print model
 3D PRINTING PHOTOPOLYMER RESIN Properties Table
3D PRINTING PHOTOPOLYMER RESIN Standard Resin
Viscosity(mPa·s) 170-200
Density(g/cm3) 1.08-1.13
Tensile Strength(MPa) 46-67
Elongation at Break(%) 28-36
Flexural Strength(MPa) 46-72
Impact Strength(J/m) 14-42
Tearing Strength(GPa) /
Heat Distortion Temp(℃) /
Hardness(Shore D)  78-82
Grades (out of 10)
Strength(S)  8
Toughness(F)  7
Forming(P)  9
Accuracy(S)  7
Speed (A)  8

 

Recommended printing parameters
Settings Machine Type
Low Light Intensity Medium Light Intensity High Light Intensity (Monochrome LCD Screen)
Representative Machine AnyCubic Photon eSUN LCD 3.0
Nova Bene 4
Creality LD-002R
Anycubic MONO X
ELEGOO Saturn
Phrozen Sonic Mini
Exposure Time/s 8-10 5-6 Not recommended
Bottom Layer Count 3-5
Bottom Exposure Time 40-60 30-40 Not recommended
Lifting Distance/mm 5.5&6-inch screen:5-6 or Higher ; 8.9&13.3-inch screen:8-12 or Higher
Lift Speed/mm·min-1  90-150  90-120  Not recommended
Retract Speed/mm·min-1    150-200

Shake well before printing

Leave Message

Leave Message