• esun products
  • shopify ePLA-Metal
  • S200 Standard Resin
  • esun products
  • ePLA-Metal
  • S200 Standard Resin

Precision Model Resin

The molding precision is high, the resolution is high, the surface of the printed product is smooth, the printing details are clearly visible.

Color:
Net Weight:
Personal Purchase:

Introduction

Parameter Information

Notes

Download

* Description:

Description

The molding precision is high, the resolution is high, the surface of the printed product is smooth, the printing details are clearly visible.

Sellingpoint

Low settlement

High hardness

High precision

High resolution

Smooth print surface

* Application
Figure Jewelry Education Garnish
* Print model
  • Precision Model Resin Print model_1
  • Precision Model Resin Print model_2
  • Precision Model Resin Print model_3
 3D PRINTING PHOTOPOLYMER RESIN Properties Table
3D PRINTING PHOTOPOLYMER RESIN Precision Model Resin
Viscosity(mPa·s) 170-270
Density(g/cm3) 1.13-1.16
Tensile Strength(MPa) 36-62
Elongation at Break(%) 25-40
Flexural Strength(MPa) 39-63
Impact Strength(J/m) 30-40
Tearing Strength(GPa) /
Heat Distortion Temp(℃) /
Hardness(Shore D) 81-86
Grades (out of 10)
Strength(S)  6
Toughness(F)  7
Forming(P)  7
Accuracy(S)  9
Speed (A)  7

High-precision resin could be easier to settle, shake it well before printing.

Leave Message

Leave Message