Dental Model Resin
Specially for dental professionals to meet the requirements of high precision, size accuracy, speed; Used for printing removable prosthodontic and orthodontic models with clear edges, low shrinkage performance and high assembly accuracy.
Color:
Net Weight：
- * Description:
-
Description
Specially for dental professionals to meet the requirements of high precision, size accuracy, speed; Used for printing removable prosthodontic and orthodontic models with clear edges, low shrinkage performance and high assembly accuracy.
Sellingpoint
High precision
Low shrinkageThe print parts has a smooth surface
- * Application
- * Print model
-
| 3D PRINTING PHOTOPOLYMER RESIN Properties Table | |
|---|---|
| 3D PRINTING PHOTOPOLYMER RESIN | Dental Model Resin |
| Viscosity(mPa·s) | 150-300 |
| Density(g/cm3) | 1.05-1.25 |
| Tensile Strength(MPa) | 42-62 |
| Elongation at Break(%) | 10-20 |
| Flexural Strength(MPa) | 59-70 |
| Impact Strength(J/m) | 44-49 |
| Tearing Strength(GPa) | / |
| Heat Distortion Temp(℃) | / |
| Hardness(Shore D) | 80 |
| Grades (out of 10) | |
| Strength（S） | 8 |
| Toughness（F） | 7 |
| Forming（P） | 8 |
| Accuracy（S） | 8 |
| Speed （A） | 8 |
| Recommended printing parameters | |||
| Settings | Machine Type | ||
| Low Light Intensity | Medium Light Intensity | High Light Intensity (Monochrome LCD Screen) | |
| Representative Machine | AnyCubic Photon | eSUN LCD 3.0 Nova Bene 4 Creality LD-002R |
Anycubic MONO X ELEGOO Saturn Phrozen Sonic Mini |
| Exposure Time/s | 8-10 | 5-6 | Not recommended |
| Bottom Layer Count | 3-5 | ||
| Bottom Exposure Time | 40-60 | 30-40 | Not recommended |
| Lifting Distance/mm | 5.5&6-inch screen：5-6 or Higher ; 8.9&13.3-inch screen：8-12 or Higher | ||
| Lift Speed/mm·min-1 | 90-150 | 90-120 | Not recommended |
| Retract Speed/mm·min-1 | 150-200 | ||
1. Shake well before printing.
2. The dental mold resin can increase the bottom exposure time to enhance the adhesion of the bottom plate.
-
REACH -
ROHS -
TDS
