PW100 PLA Water Washable Resin
Combining the advantages of eSUN’s own PLA polyol, a bio based water washable resin for ordinary consumers contains bio based components, is compatible with color screens, black and white screens, large and small size printers.
- * Description:
PW100 PLA Water Washable Resin has good toughness, low odor, and a smooth printed surface. It can be washed with water, eliminating alcohol cleaning steps, greatly reducing post-processing time, improving printing efficiency and cost-effective.
Balance of strength, toughness and rigidity.
- * Application
- * Print model
|3D PRINTING PHOTOPOLYMER RESIN Properties Table|
|3D PRINTING PHOTOPOLYMER RESIN||PW100 PLA Water Washable Resin|
|Elongation at Break(%)||17-30|
|Heat Distortion Temp(℃)||/|
|Grades (out of 10)|
1. Shake well before printing
2. It is not suitable to wash the resin with water for a long time. It can be cleaned for tens of seconds to one minute. After cleaning, it is better to dry it with a hair dryer in time. When storing, it should not be placed in a humid and high temperature environment
3. The waste water after cleaning should not be discharged directly. It is better to put it in a container under the sun so that the dissolved resin can be completely solidified before discharging.