• PLA+
  • 线材
  • 3D Printer Resin1920
  • 画板 1
  • PLA+1000X400
  • 线材
  • 3D Printer Resin
  • 画板 1 拷贝

eResin-PLA

Based on eSUN self-produced PLA polyol synthesised, with good toughness, low odor, and smooth surface of printed parts. EN71-3 toy standard certified, safer to use; can be drilled without cracking; low odor, more comfortable to use.

Color:
Net Weight:
Personal Purchase:

Introduction

Parameter Information

Notes

Download

* Description:

Description

Based on eSUN self-produced PLA polyol synthesised, with good toughness, low odor, and smooth surface of printed parts. EN71-3 toy standard certified, safer to use; can be drilled without cracking; low odor, more comfortable to use.

Sellingpoint

High toughness

Low odor

Notes

Shake well before printing

* Application
Education Garnish
* Print model
  • eResin-PLA_sky blue Print model
  • eResin-PLA_Black Print model
  • eResin-PLA_Clear Print model
  • eResin-PLA_Orange Print model
 3D PRINTING PHOTOPOLYMER RESIN Properties Table *Recommended Settings For Printer can be viewed by visiting “Download”)
3D PRINTING PHOTOPOLYMER RESIN eResin-PLA
Viscosity(mPa·s) 100-270
Density(g/cm3) 1.07-1.10
Tensile Strength(MPa) 24-55
Elongation at Break(%) 24-37
Flexural Strength(MPa) 25-61
Impact Strength(J/m) 27-40
Tearing Strength(GPa) /
Heat Distortion Temp(℃) /
Hardness(Shore D)  75-82
Grades (out of 10)
Strength(S)  6
Toughness(F)  7
Forming(P)  8
Accuracy(S)  7
Speed (A)  8

Shake well before printing

Leave Message

Leave Message