• amzon-epla-litePC
  • epla-hf pc
  • shopify
  • S200 Standard Resin
  • amazon-epla-lite-APP
  • epla-hf m
  • shopify
  • S200 Standard Resin


TPU material has good flexibility with a hardness of 95A, easy to print, and can quickly print large, complex and accurate prototypes of elastomer parts.Excellent elasticity, printed products with tpu filament are not easy to deform.

Diameter Size:
Net Weight:
Personal Purchase:


Product Details

Parameter Information



* Description:


TPU material has good flexibility, high tear resistance and wear resistance and cut resistance, sturdiness and durability; TPU filament has high hardness and good resilience, can be used for insoles and other applications.


Flexible and soft
Sturdy and durable
High flexibility

High toughness
High impact resistance

* Product introduction video
* Application
Shoe material Machinery Automobile Electronic appliances Conveying pipeline Sporting products
* Print model
  • eTPU-95A black print model
  • eTPU-95A print model (2)
  • eTPU-95A print model (3)
  • eTPU-95A print model


Filament Properties Table
Density(g/cm3) 1.21
Heat Distortion Temp(℃,0.45MPa) /
Melt Flow Index(g/10min) 1.2(190℃/2.16kg)
Tensile Strength(MPa) 35
Elongation at Break(%) ≥800
Flexural Strength(MPa) /
Flexural Modulus(MPa) /
IZOD Impact Strength(kJ/㎡) /
Durability 9/10
Printability 6/10
Recommended printing parameters
Extruder Temperature(℃) 220 – 250℃
Recommended temperature:240℃
Bed temperature(℃)  45 – 60°C
Fan Speed  100%
Printing Speed  20 – 50mm/s
Heated Bed  Optional
Recommended Build Surfaces Masking paper, PVP solid glue, PEI
Impact Resistant
Composite ——
 UV Resistant ——
Water Resistant ——
Dissolvable ——
Heat Resistant ——
Chemically Resistant ——
Fatigue Resistant
Need drying ——
Heated Bed Required ——
Print recommend Drying at 55℃/>4h, short-range extruder, slow printing

1. It is recommended to dry the printing (55℃/>4H) to achieve the best printing effect. It is recommended to use it with eBOX cartridges when printing.
2. It is recommended to use a short-range two-wheel reduction extruder designed for flexibility, eTPU-95A materials are usually difficult to print on a remote extrusion machine. The remote extruder can try to print at a slower speed at 20mm/s or even slower.
3. The nozzle may have impurities after printing for a long time. It is recommended to use it with the cleaning filament. If necessary, replace the nozzle and throat with a new one.

Leave Message

Leave Message