• Engineering Series Materials
  • PLA+CMYK-Four-color-suit
  • Engineering Series Materials-wap
  • PLA+CMYK-Four-color-suit wap

eFlex(TPU-87A)

The transparent flexible tpu filaments with a hardness of 87A are strong and durable.

Color:
Diameter Size:
Net Weight:

Introduction

Parameter Information

Notes

Download

* Description:

Description

The flexible filament is softer than TPU-95A, but harder than the eLastic; The printed product has a certain degree of transparency.

Sellingpoint

Flexible and soft
Strong and sturdy
High flexibility

High toughness
High impact resistance

* Application
Shoe material Machinery Automobile Electronic appliances Conveying pipeline Sporting products
* Print model
  • eFlex(TPU-87A)_Print model (2)
  • eFlex(TPU-87A)_Print model (3)
  • eFlex(TPU-87A)_Print model (4)
  • eFlex(TPU-87A)_Print model
Filament Properties Table
3D PRINTING FILAMENT eFlex(TPU-87A)
Density(g/cm3) 1.12
Heat Distortion Temp(℃,0.45MPa) /
Melt Flow Index(g/10min) /
Tensile Strength(MPa) 52
Elongation at Break(%) 500
Flexural Strength(MPa) /
Flexural Modulus(MPa) /
IZOD Impact Strength(kJ/㎡) /
Durability 9/10
Printability 6/10
Recommended printing parameters
Extruder Temperature(℃) 220 – 250℃
Recommended temperature:240℃
Bed temperature(℃)  45 – 60°C
Fan Speed  100%
Printing Speed  20 – 50mm/s
Heated Bed  Optional
Recommended Build Surfaces Masking paper, PVP solid glue, PEI
Feature
Flexible
Elastic
Impact Resistant
Soft
Composite ——
 UV Resistant ——
Water Resistant ——
Dissolvable ——
Heat Resistant ——
Chemically Resistant ——
Fatigue Resistant
Need drying ——
Heated Bed Required ——
Print recommend Drying at 55℃/>4h, short-range extruder, slow printing

1. It is recommended to dry (55℃/>4H) before printing to achieve the best printing effect. It is recommended to use it with eBOX cartridges when printing.
2. It is recommended to use a short-range two-wheel reduction extruder designed for flexibility, and eFlex materials cannot be printed with a remote extruder.
3. The nozzle may have impurities after printing for a long time. It is recommended to use it with the cleaning filament. If necessary, replace the nozzle and throat with a new one.

Leave Message

Leave Message