PLA-Silk Mystic
Three colors in One-line, this silk pla filament’s rich color matching makes the printed model full of mystery. You can observe the rich color combination performance from different angles of multi color pla filament.
- * Description:
-
Description
The Multi color pla filament will bring you a wonderful dynamic sense through the three-color interlaced gradient. With the silk luster texture,PLA-Silk Mystic's surface is smooth and does not show layer patterns; The silk pla filament is easy peel off, smooth and flat.
Sellingpoint
Mystery Three-color
Silk glossy texture
Smooth surfaceEasy to peel off
Excellent printability
Not easy to breakView more about PLA Filament
- * Product introduction video
-
- * Application
- * Print model
-
It can use with the eBOX Lite to keep the filament smoothly feeding to avoid twisting; Reduce the hanging angle structure in the model or reduce the speed for better cooling.
-
ePLA-Silk Mystic filament - MSDS -
eSUN_ePLA-Silk Mystic Filament_TDS
| Density(g/cm3) | 1.23 |
| Melt Flow Index | 4.5（190℃/2.16kg） |
| Heat Distortion Temp(℃,0.45MPa) | 54.7 |
| Tensile Strength(MPa) (XY) | 40.13 |
| Tensile Strength(MPa)(Z) | 12.88 |
| Elongation at Break(%)(XY) | 5.39 |
| Elongation at Break(%)(Z) | 1.3 |
| Flexural Strength(MPa)(XY) | 60.2 |
| Flexural Strength(MPa)(Z) | 19.2 |
| Flexural Modulus(MPa)(XY) | 2849.66 |
| Flexural Modulus(MPa)(Z) | 2579.63 |
| IZOD Impact Strength(kJ/㎡)(XY) | 3.01 |
| IZOD Impact Strength(kJ/㎡)(Z) | 1.9 |
| Extruder Temperature(℃) | 190-230℃ |
| Bed temperature(℃) | 45-60℃ |
| Fan Speed(％) | 100% |
| Printing Speed(mm/S) | ＜200mm/s |
| Heated Bed | Need |
| Printing Suggestions | Slow down the speed of the outer wall, and the glossiness will be better |
