ePLA-Metal
The print model of ePLA-Metal filament has a metallic luster texture, which can present a heavy metallic appearance without spraying and post-polishing treatment.The metal pla filament‘s surface is smooth and does not show layers.
Color:
Diameter Size：
Net Weight：
Personal Purchase:
- * Description:
-
Description
Compared with other materials, the metallic pla filament support is easier to peel off from the surface, and the surface is smooth and flat; ePLA-Metal filament is based on PLA material, it has PLA's easy printing feature.
Sellingpoint
Metallic glossy texture
Smooth surface
Easy to peel offExcellent printability
Lines are not easy to breakView more about PLA Filament
- * Product introduction video
-
- * Application
- * Print model
-
Click to view more detailed printing parameters
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | ePLA-Metal |
| Density(g/cm3) | 1.225 |
| Heat Distortion Temp(℃,0.45MPa) | 53℃ 5/10 |
| Melt Flow Index(g/10min) | 35.4(190℃/2.16kg) |
| Tensile Strength(MPa) | 63.16 7/10 |
| Elongation at Break(%) | 11.6 1/10 |
| Flexural Strength(MPa) | 92.18 9/10 |
| Flexural Modulus(MPa) | 3274.63 6/10 |
| IZOD Impact Strength(kJ/㎡) | 5.07 1/10 |
| Durability | 4/10 |
| Printability | 9/10 |
| Recommended printing parameters | |
| Extruder Temperature(℃) | 190 – 230℃ Recommended temperature：210℃ |
| Bed temperature(℃) | 45 – 60°C |
| Fan Speed | 100% |
| Printing Speed | 40 – 100mm/s |
| Heated Bed | Optional |
| Recommended Build Surfaces | Masking paper, PVP solid glue, PEI |
| Feature | |
| Flexible | —— |
| Elastic | —— |
| Impact Resistant | —— |
| Soft | —— |
| Composite | —— |
| UV Resistant | —— |
| Water Resistant | —— |
| Dissolvable | —— |
| Heat Resistant | —— |
| Chemically Resistant | —— |
| Fatigue Resistant | —— |
| Need drying | —— |
| Heated Bed Required | —— |
| Print recommend | —— |
