PLA-Wood
PLA-Wood filament has a wood-like appearance effect, and the surface is matte and delicate without layering.This PLA-Wood filament is a PLA based 3D printing material,which has the characteristics of easy to print and smooth surface as pla filament.
- * Description:
-
Description
PLA-Wood filament tilize active foaming technology to achieve like-wood appearance with low-density PLA of 0.7g/cm3.eSUN PLA-Wood filament is made with virgin materials, biodegradable and eco-friendly, non-toxic and low odor.
Sellingpoint
Cool appearance like wood.
Low-density PLA of 0.7g/cm3.Easy to paint.
Easy to print as PLA.Notes
1.It utilize active foaming technology to achieve like-wood appearance,which is hard to avoid stringing problem. Try to down the extruder temperature.
2.Suggest to close
3.Keep the printing speed 20mm/s-30mm/s.View more about PLA Filament
- * Product introduction video
-
- * Application
- * Print model
-
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | PLA-Wood |
| Density(g/cm3) | 0.7 |
| Heat Distortion Temp(℃,0.45MPa) | 45 |
| Melt Flow Index(g/10min) | 17(190℃/2.16kg) |
| Tensile Strength(MPa) | / |
| Elongation at Break(%) | / |
| Flexural Strength(MPa) | / |
| Flexural Modulus(MPa) | / |
| IZOD Impact Strength(kJ/㎡) | / |
| Durability | 4/10 |
| Printability | 9/10 |
| Recommended printing parameters | |
| Extruder Temperature(℃) | 210 – 230℃ Recommended temperature：210℃ |
| Bed temperature(℃) | 45 – 60°C |
| Fan Speed | 100% |
| Printing Speed | 40 – 100mm/s |
| Heated Bed | Optional |
| Recommended Build Surfaces | Masking paper, PVP solid glue, PEI |
| Feature | |
| Flexible | —— |
| Elastic | —— |
| Impact Resistant | —— |
| Soft | —— |
| Composite | —— |
| UV Resistant | —— |
| Water Resistant | —— |
| Dissolvable | —— |
| Heat Resistant | —— |
| Chemically Resistant | —— |
| Fatigue Resistant | —— |
| Need drying | —— |
| Heated Bed Required | —— |
| Print recommend | Pay attention to turn off the speed reduction function on the software |
-
MSDS -
REACH -
ROHS -
TDS
