PLA-CF
By incorporating German-imported organic impregnated short-cut carbon fibers into PLA, we have enhanced the strength and modulus of the material. The addition of carbon fibers not only reinforces the PLA but also provides it with a matte appearance and a distinctive carbon fiber sandblasted texture. Whether used as structural components or for aesthetic purposes, PLA-CF effortlessly excels, thanks to its outstanding attributes. Its printing performance is exceptional, making it suitable for high-speed printing.
- * Description:
-
Description
By incorporating German-imported organic impregnated short-cut carbon fibers into PLA, we have enhanced the strength and modulus of the material. The addition of carbon fibers not only reinforces the PLA but also provides it with a matte appearance and a distinctive carbon fiber sandblasted texture. Whether used as structural components or for aesthetic purposes, PLA-CF effortlessly excels, thanks to its outstanding attributes. Its printing performance is exceptional, making it suitable for high-speed printing.
Features
High strength
Matte appearance
Carbon fiber frosted textureExcellent printability
High speed printingReview
- * Product introduction video
-
- * Application
- * Print model
-
1.If there is a decrease in printing performance with PLA-CF, it is recommended to pre-dry (40°C/ >4H) before printing to achieve the best printing results. During printing, it is advised to use it in conjunction with the eBOX filament box.
2.PLA-CF filament is relatively rigid and should not be excessively bent. In the feeding pipeline, try to avoid excessive bending of the filament to prevent breakage.
3.PLA-CF contains carbon fiber, and prolonged use may cause excessive wear on the nozzle and extruder gears. It is recommended to use a hardened steel nozzle or a ruby nozzle, and if possible, opt for hardened steel extruder gears.
-
PLA-CF HS Parameters for
Bambu Lab & Creality -
PLA-CF Filament MSDS -
PLA-CF Filament TDS -
REACH -
RoHS
| Density(g/cm3) | 1.21 |
| Melt Flow Index | 5.37（190℃/2.16kg） |
| Heat Distortion Temp(℃,0.45MPa) | 53 |
| Tensile Strength(MPa) (XY) | 59.64 |
| Tensile Strength(MPa)(Z) | 31.78 |
| Elongation at Break(%)(XY) | 5.26 |
| Elongation at Break(%)(Z) | 2.91 |
| Flexural Strength(MPa)(XY) | 96.1 |
| Flexural Strength(MPa)(Z) | 53.1 |
| Flexural Modulus(MPa)(XY) | 5431.38 |
| Flexural Modulus(MPa)(Z) | 3184.76 |
| IZOD Impact Strength(kJ/㎡)(XY) | 4.03 |
| IZOD Impact Strength(kJ/㎡)(Z) | 2.16 |
| Extruder Temperature(℃) | 190-230℃ |
| Bed temperature(℃) | 45-60℃ |
| Fan Speed(％) | 100% |
| Printing Speed(mm/S) | ＜200mm/s |
| Heated Bed | Need |
| Printing Suggestions | Use hardened steel nozzle |
| Need to Dry | √ |
