PA12
Developed based on PA12; low water absorption, the size of printed parts is less affected by humidity and temperature. PA12 has high toughness, high impact resistance, and can be used to print durable parts; it has up to 165% elongation at break and excellent fatigue resistance; self-lubricating wear resistance, can print mechanical gears; high temperature resistance, thermal deformation The temperature is 100℃, can be used for temperature-resistant parts; low shrinkage, not easy to warp and crack during printing.
- * Description:
-
Description
Developed based on PA12; low water absorption, the size of printed parts is less affected by humidity and temperature. PA12 has high toughness, high impact resistance, and can be used to print durable parts; it has up to 165% elongation at break and excellent fatigue resistance; self-lubricating wear resistance, can print mechanical gears; high temperature resistance, thermal deformation The temperature is 100℃, can be used for temperature-resistant parts; low shrinkage, not easy to warp and crack during printing.
Sellingpoint
Low moisture absorption
Heat resistance
High toughness
High impact resistanceAbrasion resistance
High dimensional stability
Excellent printability
- * Application
- * Print model
-
PA12 needs to be dried (70℃/＞12H) before printing to achieve the best printing effect. It is recommended to use it with the eBOX cartridge when printing.
-
MSDS -
TDS -
ROHS -
REACH
| Density(g/cm3) | 1.012 |
| Melt Flow Index | 55.64(270℃/2.16kg) |
| Heat Distortion Temp(℃,0.45MPa) | 100 10/10 |
| Extruder Temperature(℃) | 260-290℃ |
| Bed temperature(℃) | 70-90℃ |
| Fan Speed(％) | 0% |
| Printing Speed(mm/S) | ＜150mm/s |
| Heated Bed | Need |
| Printing Suggestions | Dry at 70 ℃/>12h, seal and print |
| Need to Dry | √ |
