• PLA+
  • 线材
  • 3D Printer Resin1920
  • 画板 1
  • PLA+1000X400
  • 线材
  • 3D Printer Resin
  • 画板 1 拷贝

e4D-1

Heat-induced shape memory material is modified based on PLA material; it can be deformed by force in hot water, and can be fixed and deformed at room temperature and can be stored for a long time. When placed in hot water again, the parts can return to the original shape.

Color:
Diameter Size:
Net Weight:

Introduction

Parameter Information

Notes

Download

* Description:

Description

Heat-induced shape memory material is modified based on PLA material; it can be deformed by force in hot water, and can be fixed and deformed at room temperature and can be stored for a long time. When placed in hot water again, the parts can return to the original shape.

Sellingpoint

Shape memory

Excellent printability

* Product introduction video
* Application
Home Wear Robot Toy
* Print model
  • 4D FILAMENT_print model (2)
  • 4D FILAMENT_print model (3)
  • 4D FILAMENT_print model
Filament Properties Table
3D PRINTING FILAMENT e4D-1
Density(g/cm3) 1.23
Heat Distortion Temp(℃,0.45MPa) /
Melt Flow Index(g/10min) 5.8(200℃/2.16kg)
Tensile Strength(MPa) 48.89
Elongation at Break(%) 168.83
Flexural Strength(MPa) 49.45
Flexural Modulus(MPa) 1302.4
IZOD Impact Strength(kJ/㎡) 7.5
Durability 4/10
Printability 9/10
Recommended printing parameters
Extruder Temperature(℃) 200 – 230℃
Recommended temperature:210℃
Bed temperature(℃)  45 – 60°C
Fan Speed  100%
Printing Speed  40 - 50mm/s
Heated Bed  Optional
Recommended Build Surfaces Masking paper, PVP solid glue, PEI
Feature
Flexible ——
Elastic ——
Impact Resistant ——
Soft ——
Composite ——
 UV Resistant ——
Water Resistant ——
Dissolvable ——
Heat Resistant ——
Chemically Resistant ——
Fatigue Resistant ——
Need drying ——
Heated Bed Required ——
Print recommend The extruder should be good for heat dissipation

The 4D printing material has a low softening temperature. When printing the 4D filament, pls pay attention to the extruder. If the temp is too high, it may cause the material to soften and block the nozzle.

Leave Message

Leave Message