PLA-Basic
This is an entry-level 3D printing filament designed for enthusiasts and beginners. Based on modified PLA, this filament is easy to print, emits no irritating odors, resists stringing and warping, and delivers excellent print quality. It is a cost-effective choice among 3D printing materials.
- * Description:
-
Description
A low-cost basic printing consumable based on modified PLA. While maintaining its environmental characteristics, the added special materials enhances the fluidity and fast printing performance of PLA-basic, allowing its maximum volume flow rate to reach about 30mm³/s under the printing conditions of a Bambu P1 series machine with 0.4mm nozzle. PLA-basic material is easy to print, does not produce irritating odor, it is not easy to draw, the finished product does not warp, and has good molding quality. It is a cost-effective choice among 3D fast printing consumables.
Sellingpoint
High Speed Prining
Easy to PrintCost-effective
- * Product introduction video
-
- * Application
- * Print model
-
-
ROHS -
TDS -
MSDS -
REACH
| Density(g/cm3) | 1.24 |
| Melt Flow Index | 3.5-4.5（190℃/2.16KG） |
| Heat Distortion Temp(℃,0.45MPa) | 50-60 |
| Tensile Strength(MPa) (XY) | 63.95 |
| Tensile Strength(MPa)(Z) | 28.29 |
| Elongation at Break(%)(XY) | 4.17 |
| Elongation at Break(%)(Z) | 2.41 |
| Flexural Strength(MPa)(XY) | 101.2 |
| Flexural Strength(MPa)(Z) | 40.5 |
| Flexural Modulus(MPa)(XY) | 3085.87 |
| Flexural Modulus(MPa)(Z) | 2832.46 |
| IZOD Impact Strength(kJ/㎡)(XY) | 3.09 |
| IZOD Impact Strength(kJ/㎡)(Z) | 2.15 |
| Extruder Temperature(℃) | 210-230℃ |
| Bed temperature(℃) | 45 - 60°C |
| Fan Speed(％) | 100% |
| Printing Speed(mm/S) | 40-300mm/s |
| Heated Bed | Need |
