PET-CF
The addition of short-cut carbon fiber makes PET-CF further strengthened in the overall rigidity, hardness, and wear resistance. At the same time, the carbon fiber inhibits the warping behavior that can occur in PET during the printing process and make it possible to print PET-CF with only 70-80°C substrate heating and doesn’t need cavity insulation. So it is quite easy to print. Additionally, its 3D- printed parts are suitable for use in applications requiring high resistance to heat, moisture, and long-term stress.
- * Description:
-
Description
The addition of short-cut carbon fiber makes PET-CF further strengthened in the overall rigidity, hardness, and wear resistance. At the same time, the carbon fiber inhibits the warping behavior that can occur in PET during the printing process and make it possible to print PET-CF with only 70-80°C substrate heating and doesn't need cavity insulation. So it is quite easy to print. Additionally, its 3D- printed parts are suitable for use in applications requiring high resistance to heat, moisture, and long-term stress.
Sellingpoint
Carbon fibre reinforced
High stabilityHigh toughness and heat resistance
Low moisture absorption
- * Application
- * Print model
-
-
TDS -
MSDS -
REACH -
ROHS
| Density(g/cm3) | 1.42 |
| Melt Flow Index | / |
| Heat Distortion Temp(℃,0.45MPa) | 75 (145 after annealing) |
| Glass Transition Temperature | 70 |
| Tensile Strength(MPa) (XY) | 80.32 |
| Tensile Strength(MPa)(Z) | 22 |
| Elongation at Break(%)(XY) | 3.61 |
| Elongation at Break(%)(Z) | 2.11 |
| Flexural Strength(MPa)(XY) | 135.6 |
| Flexural Strength(MPa)(Z) | 33.4 |
| Flexural Modulus(MPa)(XY) | 8264.15 |
| Flexural Modulus(MPa)(Z) | 2165.01 |
| IZOD Impact Strength(kJ/㎡)(XY) | 7.16 |
| IZOD Impact Strength(kJ/㎡)(Z) | 2.12 |
| Extruder Temperature(℃) | 250-300℃ |
| Bed temperature(℃) | 70-120℃ |
| Fan Speed(％) | 0-20% |
| Printing Speed(mm/S) | ＜200mm/s |
| Heated Bed | Need |
| Printing Suggestions | Drying at 80 ℃/>8h, 0.4, 0.6 hardened rigid nozzle sealed box printing |
| Need to Dry | √ |
