Pinshape contest collection week 7

2018/01/24

Pinshape contest collection week 7

In this week we have some prints from games, movies and one suitable for car lovers. Let us have a look!

Scorpion 3D Print Model – 3D Printed by tacblades

Print Time: 36 hr(s) 0 min(s)

Material Type: PLA

Layer Height: 0.1 mm

Print Speed: 40.0 mm/s

Extrusion Temperature: 219.0°C

Infill %: 15.0 %

This is a 3D printed scorpion. This type of PLA gives it a bronze feel and make the scorpion very alive!

Overwatch Mercy Caduceus Staff – 3D Printed by Jonathan Bowen

Print Time: 40 hr(s)

Material Type: PLA

Layer Height: 0.2 mm

Extrusion Temperature: 210.0°C

Infill %: 15.0 %

This Overwatch Mercy Caduceus Staffis designed to be attached to a 1″ PVC pipe. This allows it to be scaled to the user’s height. The design does require some support but has been slice to minimize it. Wing connector Open and Wing Connector Closed are used to hold the wings in either open or closed formation depending on how you want to build the prop.

Ferrari Enzo OpenRC mod – 3D Printed by Matt0

Print Time: 60 hr(s)

Material Type: black pla

Layer Height: 0.2 mm

Print Speed: 25.0 mm/s

Extrusion Temperature: 210.0°C

Infill %: 25.0 %

3D printed car models are very common these days and this is a perfect model forfansof the Ferrari Enzo and Formula one.The designercreate thisfor Daniel Norées OpenRC F1 car.The best part is you can also control it and make it run!

The Young Wolf’s Howl, Exotic Sword from Destiny’s Rise of Iron – 3D Printed by blurrycorgi

Material Type: PLA

Layer Height: 0.1 mm

Print Speed: 100.0 mm/s

Extrusion Temperature: 215.0°C

Infill %: 5.0 %

Here is the Young Wolf’s Howl, the 3rd year exotic sword from Bungie’s hit game Destiny. The sword itself is 1:1 scale, measuring over four and a half feet long, and includes both channels for reinforcement rods and a slot-and-tab alignment system with the blade.

Groot – 3D Printed by jimenezr

Print Time: 18 hr(s)

Material Type: Pla

Layer Height: 0.15 mm

Print Speed: 60.0 mm/s

Extrusion Temperature: 215.0 °C

Infill %: 40.0 %

This is a groot from the Guardians of the Galaxy. It took a long time and came out pretty good. It’s stained and used black marker to paint the eyes and clear Epoxy glue to get the gloss on the eyes.