• PLA+
  • 线材
  • 3D Printer Resin1920
  • PLA+1000X400
  • 线材
  • 3D Printer Resin

Maker’s welfare comes!

Post time: 2018-04-18

2018/04/18

Maker’s welfare comes!

All the 3D printing amateurs are have a nickname as maker.

At the same time, they all trapped in the same trouble.

Maker’sworries

1. When filament absorbs moisture, printing process will appear errors.

2.Improper storage, easy to have dust, there is impurity appeared in printing.

3.Hard for us to precisely weigh the filaments when printing.

Small but useful !

Functional description:

  • No central axis, to prevent the filaments from twining;
  • Sealed protection, full-scale dustproof, built-in drying bag special tank, easy for recyclinguse.
  • freelyset the drying time and heating temperature , and detect the temperature in ebox in real time.
  • Freely set the weight of the empty board, debuggingg / pound dual unit weighing, real-time detection of the remaining filamentsweight;
  • Use LED backlit LCD screen which can automatically turn off the lights, it can certainly save power;
  • Equipped with non-slip mat.

Thecomparisonbetween adopted eBOX and unadopted eBOX.

Put in the filaments into eSUN’s eBOX, to heating and dried it.

PVA Drying Effect

PVA material with more severe moisture absorption, the more bubbles will appear when printing, and the printing products will be more blanch.

PolyamideDrying Effect

PA material with more severe moisture absorption, the more bubbles will appear when printing, and the degree of transparency will decrease.

A high quality 3D printing device

Tackle the makers’problem on storing filaments.

Let creativity and innovation be alive!


  • Previous:
  • Next:
  • Leave Message

    Leave Message