-
Precautions for Use of 3D Filaments
-
Interlayer Dislocation
The upper part of the model is misaligned with the lower part, and the layer ...
-
Wire drawing
Obvious wire drawing appears when printing is idling.
Material: The material ...
-
Warp
warp
Non-stick base plate
The corner of the model or ...
-
Print distortion
The material temperature is too high, the model can not be quickly cooled and...
-
Not Sticking to the Bed
If the first layer is not sticking to the build platform, it will create prob...
-
Interlayer cracking
Print cracking and warping
Material: ABS, ASA, PA, PC and other materials and...
-
Surface roughness
Surface roughness is usually related to material, slicing, and temperature.
&...
-
Plugging
Plugging is usually caused by insufficient extrusion pressure inside the nozz...
