• skil-magic-pc
  • PM200
  • AE-PC
  • 1920X350(5)
  • skil-magic-wap
  • PM200-wap3
  • AE
  • 600X240(2)

eSilk-PLA Magic

The model printed with dual color pla filament has a dreamy and gorgeous bi-color appearance. Magic pla filament will appear in different colors at different angles.

Color:
Diameter Size:
Net Weight:
Personal Purchase:

Introduction

Parameter Information

Notes

Download

* Description:

Description

When the model printed with dual color pla filament is rotated, it has a dynamic appearance brought by two different colors. Compared with other materials, eSilk-PLA Magic is easier to peel off, and the surface is smooth and flat; This magic pla filament is an upgrade based on PLA and has the same quality of easy printing.

Sellingpoint

Dreamy gorgeous two-tone appearance
Silk glossy texture
Smooth surface

Easy to peel off
Excellent printability
Not easy to break

* Application
Toy Accessory
* Print model
  • eSilk-PLA Magic (2)
  • eSilk-PLA Magic
  • eSilk-PLA Magic (4)
  • eSilk-PLA Magic (3)
Filament Properties Table
3D PRINTING FILAMENT eSilk-PLA Magic
Density(g/cm3) 1.256
Heat Distortion Temp(℃,0.45MPa) 54.7
Melt Flow Index(g/10min) 11.32(190℃/2.16kg)
Tensile Strength(MPa) 57.64
Elongation at Break(%) 21.76
Flexural Strength(MPa) 78.70
Flexural Modulus(MPa) 2800.36
IZOD Impact Strength(kJ/㎡) 6.45
Durability 4/10
Printability 9/10
Recommended printing parameters
Extruder Temperature(℃) 190 – 230℃
Recommended temperature:210℃
Bed temperature(℃)  45 – 60°C
Fan Speed  100%
Printing Speed  40 – 100mm/s
Heated Bed  Optional
Recommended Build Surfaces Masking paper, PVP solid glue, PEI
Feature
Flexible ——
Elastic ——
Impact Resistant ——
Soft ——
Composite ——
UV Resistant ——
Water Resistant ——
Dissolvable ——
Heat Resistant ——
Chemically Resistant ——
Fatigue Resistant ——
Need drying ——
Heated Bed Required ——
Print recommend ——

It can be used with the eBOX Lite to keep the spool rolling smoothly without shaking to avoid twisting and color changing;

Reduce the overhang angle structure in the model when printing or slower the printing speed when you use eSilk-Magic.

Leave Message

Leave Message