PLA-Matte Rainbow
PLA-Matte Rainbow is base on the popular PLA-Matte filament, combine different colors according to different themes to match. The colorful and gorgeous rainbow filament maintain outstanding matte texture at same time. This filament is very suitable for creative design, the surface of the model is delicate and smooth, the printing effect is also good.
- * Description:
-
Description
PLA-Matte Rainbow is base on the popular PLA-Matte filament, combine different colors according to different themes to match. The colorful and gorgeous rainbow filament maintain outstanding matte texture at same time. This filament is very suitable for creative design, the surface of the model is delicate and smooth, the printing effect is also good.
Sellingpoint
Colorful rainbow appearance
Environmentally friendly
High cost efficient
Fast printingEasy to peel off support
Excellent printability
Lines are not easy to break
Low density
- * Product introduction video
-
- * Application
- * Print model
-
The filament of PLA-Matte are softer than other lines. The extruder should not be adjusted too tight to avoid affecting printing.
-
TDS -
MSDS -
REACH -
RoHS
| Density(g/cm3) | 1.329 |
| Melt Flow Index | 5.8（190℃/2.16kg） |
| Heat Distortion Temp(℃,0.45MPa) | 51 |
| Tensile Strength(MPa) (XY) | 25.976 |
| Tensile Strength(MPa)(Z) | 14.31 |
| Elongation at Break(%)(XY) | 7.23 |
| Elongation at Break(%)(Z) | 2.26 |
| Flexural Strength(MPa)(XY) | 42.6 |
| Flexural Strength(MPa)(Z) | 21.1 |
| Flexural Modulus(MPa)(XY) | 2249.05 |
| Flexural Modulus(MPa)(Z) | 1782.62 |
| IZOD Impact Strength(kJ/㎡)(XY) | 4.7 |
| IZOD Impact Strength(kJ/㎡)(Z) | 2.15 |
| Extruder Temperature(℃) | 190-230℃ |
| Bed temperature(℃) | 45-60℃ |
| Fan Speed(％) | 100% |
| Printing Speed(mm/S) | ＜200mm/s |
| Heated Bed | Need |
