PLA-Matte Dual
PLA-Matte Dual is an excellent printing material that stands out for its matte surface. This material has a unique two-color design, showing a sense of color layering, making the model textured and clear. Its delicate surface and no obvious layer pattern provide a high-level touch and visual quality for the printed parts. Compared with ABS, PLA-Matte is more convenient to use, the closed cavity is not needed for the printing. It has a lower shrinkage rate, hard to warping or cracking, making it an ideal choice for printing large-scale models.
- * Description:
-
Description
PLA-Matte Dual is an excellent printing material that stands out for its matte surface. This material has a unique two-color design, showing a sense of color layering, making the model textured and clear. Its delicate surface and no obvious layer pattern provide a high-level touch and visual quality for the printed parts. Compared with ABS, PLA-Matte is more convenient to use, the closed cavity is not needed for the printing. It has a lower shrinkage rate, hard to warping or cracking, making it an ideal choice for printing large-scale models. In addition, the support structure of PLA-Matte can be removed easily from the surface and leave a smooth and flat surface. It has high strength, and the filament is not easy to break, ensure the continuity and stability of long-term printing without nozzle clogging. These characteristics make PLA-Matte Dual very suitable for the verification of early concept models and making rapid prototypes.
Sellingpoint
Two-colored filament
Environmentally friendly
High cost efficient
Fast printingEasy to peel off the support
Excellent printability
Filament is not easy to break
Matte surface
- * Application
- * Print model
-
The lines of PLA-Matte Dual are softer than other lines. The extruder should not be adjusted too tight to avoid affecting printing.
-
TDS -
MSDS -
REACH -
RoHS
| Density(g/cm3) | 1.174 |
| Melt Flow Index | 2.1(190℃/2.16kg) |
| Heat Distortion Temp(℃,0.45MPa) | 54 |
| Tensile Strength(MPa)(Z) | 13.58 |
| Elongation at Break(%)(Z) | 0.39 |
| Flexural Strength(MPa)(XY) | 56.72 |
| Flexural Modulus(MPa)(XY) | 2786.4 |
| IZOD Impact Strength(kJ/㎡)(XY) | 3.41 |
| Extruder Temperature(℃) | 215-230℃ |
| Bed temperature(℃) | 45-60℃ |
| Fan Speed(％) | 100% |
| Printing Speed(mm/S) | ＜200mm/s |
| Heated Bed | Need |
