• PLA+
  • 线材
  • 3D Printer Resin1920
  • PLA+1000X400
  • 线材
  • 3D Printer Resin

ePLA-GF

The glass fiber reinforced pla filament is developed on the basis of PLA is added with 16% glass fiber, which greatly enhances the rigidity and impact resistance of ordinary PLA. The ePLA-GF’s bending modulus is as high as 4400MPa, which is highly rigid and not easy to distort;

Color:
Diameter Size:
Net Weight:

Introduction

Parameter Information

Notes

Download

* Description:

Description

The glass fiber reinforced pla filament has high impact resistance and good printability; Suitable for mechanical parts prototypes with requirements for rigidity and impact resistance; Wear-resistant performance makes ePLA-GF suitable for printing gears and can be used as temporary functional parts.

Sellingpoint

High rigidity

High impact resistance

High wear resistance

Excellent printability

Review

* Application
Mechanical Consumer electronics Automobile
* Print model
  • DSCF3189(3)
  • DSCF3190(1)
  • DSCF3197(1)
  • DSCF3200(3)
Filament Properties Table
3D PRINTING FILAMENT ePLA-GF
Density(g/cm3) 1.31
Heat Distortion Temp(℃,0.45MPa) 56 5/10
Melt Flow Index(g/10min) 6.36(190℃/2.16kg)
Tensile Strength(MPa) 59.27 7/10
Elongation at Break(%) 7.99 1/10
Flexural Strength(MPa) 85.01 8/10
Flexural Modulus(MPa) 4414.89 8/10
IZOD Impact Strength(kJ/㎡) 10.16 2/10
Durability 4/10
Printability 9/10
Recommended printing parameters
Extruder Temperature(℃) 190 – 230℃ Recommended temperature:215℃
Bed temperature(℃)  45 – 60°C
Fan Speed  100%
Printing Speed  40 – 100mm/s
Heated Bed  Optional
Recommended Build Surfaces Masking paper, PVP solid glue, PEI
Feature
Flexible ——
Elastic ——
Impact Resistant
Soft ——
Composite
 UV Resistant ——
Water Resistant ——
Dissolvable ——
Heat Resistant ——
Chemically Resistant ——
Fatigue Resistant ——
Need drying ——
Heated Bed Required ——
Print recommend ——

 

1. ePLA-GF line has strong rigidity and is not easy to bend. In the feeding pipeline, excessive bending of filament should be avoided as far as possible 2. ePLA-GF is very easy to grind the nozzle and extruder gear. It is recommended to use hardened steel nozzle or ruby nozzle. If conditions permit, hardened steel extruder gear can be selected. If the printing time is long and the plug occurs, the throat and nozzle need to be replaced 3. The blowing fan can be properly turned off to improve the model strength

Leave Message

Leave Message