eMate(Low temperature PCL)
PCL-based biodegradable material has good toughness and impact resistance; the printing temperature of 70°C makes it safer than high-temperature PLA and ABS; an excellent material companion for 3D printing pens; after printing, the material can be placed in 60°C water to change the shape which can be used as a handmade material and be recycled.
- * Description:
-
Description
PCL-based biodegradable material has good toughness and impact resistance; the printing temperature of 70°C makes it safer than high-temperature PLA and ABS; an excellent material companion for 3D printing pens; after printing, the material can be placed in 60°C water to change the shape which can be used as a handmade material and be recycled.
Sellingpoint
Printed at Low temperature
Safe
Easy to shape by hand
High toughness
High impact resistance
- * Application
- * Print model
-
Filament Properties Table | |
---|---|
3D PRINTING FILAMENT | eMate |
Density(g/cm3) | 1.16 |
Heat Distortion Temp(℃,0.45MPa) | 45 |
Melt Flow Index(g/10min) | 0.5(70℃/2.16kg) |
Tensile Strength(MPa) | 18 |
Elongation at Break(%) | >800 |
Flexural Strength(MPa) | 13 |
Flexural Modulus(MPa) | 345 |
IZOD Impact Strength(kJ/㎡) | Keep on |
Durability | 4/10 |
Printability | 6/10 |
Recommended printing parameters | |
Extruder Temperature(℃) | 70-100℃ |
Bed temperature(℃) | 0°C |
Fan Speed | 100% |
Printing Speed | 10-20mm/s |
Heated Bed | —— |
Recommended Build Surfaces | —— |
Feature | |
Flexible | √ |
Elastic | √ |
Impact Resistant | √ |
Soft | √ |
Composite | —— |
UV Resistant | —— |
Water Resistant | —— |
Dissolvable | —— |
Heat Resistant | —— |
Chemically Resistant | —— |
Fatigue Resistant | —— |
Need drying | —— |
Heated Bed Required | √ |
Print recommend | —— |
Avoid high temperature during storage
-
REACH
-
ROHS
-
TDS