TPE-83A
Flexible TPE printing consumables with hardness of 83A are sturdy and durable; Printed models are softer than TPU-95A and eFlex, with delicate and soft hand feeling,also low surface friction.
- * Description:
-
Description
Flexible TPE printing consumables with hardness of 83A are sturdy and durable; Printed models are softer than TPU-95A and eFlex, with delicate and soft hand feeling,also low surface friction.
Sellingpoint
Matte surface effect
Skin-friendly feel
Flexible and soft
Sturdy and durableHigh elasticity
High tenacity
High impact resistance
- * Application
- * Print model
-
Filament Properties Table | |
---|---|
3D PRINTING FILAMENT | TPE-83A |
Density(g/cm3) | 1.14 |
Heat Distortion Temp(℃,0.45MPa) | / |
Melt Flow Index(g/10min) | / |
Tensile Strength(MPa) | 32 |
Elongation at Break(%) | 420 |
Flexural Strength(MPa) | / |
Flexural Modulus(MPa) | / |
IZOD Impact Strength(kJ/㎡) | / |
Durability | 9/10 |
Printability | 6/10 |
Recommended printing parameters | |
Extruder Temperature(℃) | 220 – 250℃ Recommended temperature:240℃ |
Bed temperature(℃) | 45 – 60°C |
Fan Speed | 100% |
Printing Speed | 20 – 50mm/s |
Heated Bed | Optional |
Recommended Build Surfaces | Masking paper, PVP solid glue, PEI |
Feature | |
Flexible | √ |
Elastic | √ |
Impact Resistant | √ |
Soft | √ |
Composite | —— |
UV Resistant | —— |
Water Resistant | —— |
Dissolvable | —— |
Heat Resistant | —— |
Chemically Resistant | —— |
Fatigue Resistant | √ |
Need drying | —— |
Heated Bed Required | —— |
Print recommend | Drying at 55℃/>4h, short-range extruder, slow printing |
1. it is recommended to dry the filaments (55℃/> 4h) before printing to achieve the best printing effect, and it would be better to use together with eBOX when printing.
2. It is recommended to use a short-range double-wheel deceleration extruder designed for flexibility, and TPE-83A materials cannot be printed by a remote extruder
3. After a long printing time, impurities may remain in the nozzle, so it is recommended to use it with cleaning filament. If necessary, pleasw replace the nozzle and throat with new ones.
-
TPE-83A HS Parameters for
Bambu Lab & Creality -
MSDS
-
REACH
-
ROHS
-
TDS