• PLA+
  • 线材
  • 3D Printer Resin1920
  • PLA+1000X400
  • 线材
  • 3D Printer Resin

eLastic(TPE-83A)

Flexible TPE printing consumables with hardness of 83A are sturdy and durable; Printed models are softer than TPU-95A and eFlex, with delicate and soft hand feeling,also low surface friction.

Color:
Diameter Size:
Net Weight:
Personal Purchase:

Introduction

Parameter Information

Notes

Download

* Description:

Description

Flexible TPE printing consumables with hardness of 83A are sturdy and durable; Printed models are softer than TPU-95A and eFlex, with delicate and soft hand feeling,also low surface friction.

Sellingpoint

Matte surface effect
Skin-friendly feel
Flexible and soft
Sturdy and durable

High elasticity
High tenacity
High impact resistance

* Application
Shoe material Machinery Automobile Electronic appliances Conveying pipeline Sporting products
* Print model
  • DSCF1596
  • DSCF1629
Filament Properties Table
3D PRINTING FILAMENT eLastic(TPE-83A)
Density(g/cm3) 1.14
Heat Distortion Temp(℃,0.45MPa) /
Melt Flow Index(g/10min) /
Tensile Strength(MPa) 32
Elongation at Break(%) 420
Flexural Strength(MPa) /
Flexural Modulus(MPa) /
IZOD Impact Strength(kJ/㎡) /
Durability 9/10
Printability 6/10
Recommended printing parameters
Extruder Temperature(℃) 220 – 250℃
Recommended temperature:240℃
Bed temperature(℃)  45 – 60°C
Fan Speed  100%
Printing Speed  20 – 50mm/s
Heated Bed  Optional
Recommended Build Surfaces Masking paper, PVP solid glue, PEI
Feature
Flexible
Elastic
Impact Resistant
Soft
Composite ——
 UV Resistant ——
Water Resistant ——
Dissolvable ——
Heat Resistant ——
Chemically Resistant ——
Fatigue Resistant
Need drying ——
Heated Bed Required ——
Print recommend Drying at 55℃/>4h, short-range extruder, slow printing

1. it is recommended to dry the filaments (55℃/> 4h) before printing to achieve the best printing effect, and it would be better to use together with eBOX when printing.
2. It is recommended to use a short-range double-wheel deceleration extruder designed for flexibility, and eLastic materials cannot be printed by a remote extruder
3. After a long printing time, impurities may remain in the nozzle, so it is recommended to use it with cleaning filament. If necessary, pleasw replace the nozzle and throat with new ones.

Leave Message

Leave Message